Mafell KFU 1000E Grooving Machine

  • Precise flooring grooves up to 4.5mm (~3/16”) deep
  • Powerful 900 W motor with speed control
  • Portable carrying case included

Download KFU 1000E Instruction Manual

This item ships in 1 to 3 months.  Please call to order!

$4,350.00
SKU
951122
Mafell KFU 1000E Grooving Machine is available to buy in increments of 1

Grooving machines are used when laying resilient floor coverings.  The shape and depth of the welding rod depend on the experience of the installer and the flooring manufacturer’s recommendations.  These applications call for special machines that can meet these individualized requirements, and Mafell has fully delivered with the KFU 1000E grooving machine.

The powerful 900 watt (1.2 hp) single-phase motor allows a speed of 8,000 to 15,000 rpm and an accordingly clean cutting result.  With the stepless electronic controls, you can use the machine for many types of materials—simply set the right speed and off you go!  From there the KFU 1000E features consistent cutting depth, even on uneven floors due to level compensation.  The floor surface immediately in front of the cutting blade is scanned and the cutting depth is automatically corrected.  Furthermore, the tool does not tip on uneven floors (thanks to three ball-bearing rollers) resulting in accurate guidance of the whole machine.  Cutting depth can be adjusted exactly from 0 to 4.5mm (~3/16”) for all floor covering thicknesses, and an automatic clamping device then prevents any accidental adjusting of cutting depth.

At just 10.8 pounds with a 32.8-foot power cord, the 120 volt KFU 1000E is easy to handle and has a large operating radius.  Users can produce grooves as close as 11.5 mm (~7/16”) to a wall, and Mafell offers an optional Accessory Handle for working upright.  Another unique feature of the KFU 1000E is the built-in cutting blade lock for quick blade changes.  And the enclosed blade cover meets high safety standards, causing efficient extraction into the large chip bag and preventing chips from hindering the rollers.  Everything fits in the convenient carrying case for maximum portability.  One should expect nothing less from Germany engineering!


Specifications

Cutting depth: 0 to 3/16" (4.5mm)
Cutting blade diameter: 4-11/16"
Nominal speed - no load: 8,000 to 15,000 rpm
Motor: 120 V / 60 Hz
Current: 7 A
Weight: 10.8 lbs

Standard Equipment

  • 3.6mm Grooving Blade (~1/8")
  • Carrying Case
  • Allen Key
  • 32.8 ft Cord

Accessories

  • Various cutter blades and other accessories are available below
  • The beginning and end of the groove must be completed with a Hand Grooving Tool
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account