We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Mafell UVA 115E Orbital Sander
- Low vibration and efficient dust extraction
- Powerful 230 V motor
- Easy sand paper change and portable carrying case
Download UVA 115E Brochure
Download UVA 115E Instruction Manual
This item ships in 6 to 12 months. Please call to order!
Sanding can be a tedious job, but Mafell has engineered several quality-of-life improvements into the UVA 115E Orbital Sander so that sanding is actually fun. This tool sands corners, edges, and curved surfaces perfectly, and its sand paper change is easy using the tool's mechanical clamp and Mafell T-MAX case. The Abranet® abrasive mesh offers many choices between fine surfaces or high removal rates, and the sander's speed can be electronically adjusted and locked to avoid excessive heat and sticking when sanding plastic or painted surfaces.
One might expect that the vibration of such a powerful sander (with a 3/32" sanding stroke) would cause fatigue to your hands and arms, but Mafell added rubber gaskets and weighted counterbalances to effectively isolate the handles. As a result, the UVA 115E transmits substantially less vibration compared with other sanders, as seen when resting a glass of water on the handle (video below).
Perhaps the most noticeable feature of the UVA 115E (and important to your health) is its dust removal. The Abranet® abrasive mesh has around 24,000 holes for highly efficient dust extraction, and the side channels in the sanding pad make extraction even more effective. Also, the UFB-1 filter bag is made of an extremely tear-resistant, anti-static nonwoven material, and the filter's high air throughput reduces the residual dust to as little as 3%. Finally, the new Mafell motor is properly sealed against dust, which leads to a long service life.
Specifications
Sanding disk area: | 4-1/2" by 9" |
Sanding stroke: | 3/32" (2.6 mm) |
Vibration: | < 8.2 ft/s² |
Nominal speed - no load: | 2,000 to 12,000 rpm |
Motor: | 230 V |
Current: | 2.1 A |
Weight: | 6 lbs |
Standard Equipment
- UFB-1 Filter Bag
- Delta 105 Sanding Pad
- Abranet® Abrasive Mesh: one P 60, P 80, P 100, P 120, P 150, P 180, P 240, P 320
- Abranet® Delta 105 Abrasive Mesh: one P 120
- UVA-SA 10 Interface Pad (4.5" by 9")
- UVA-SA Delta 105 Interface Pad
- Auxiliary Handle
- Allen Key
- 13.1 ft Cord
- T-MAX Carrying Case
Accessories
- Various abrasive mesh sets, filter bags, and other accessories are available below