Mafell KSS 400 Cross-Cutting System

Rating:
100 % of 100
  • Fast and accurate cross-cutting up to 15-3/4" long
  • Up to 1-15/16" cutting depth on track
  • Only 11.8 lbs including track
  • Compatible with Mafell Guide Rail System

Download KSS 400 Brochure
Download KSS 400 Instruction Manual
and Guide Track 400 Instructions

PLEASE CALL TO ORDER!

$895.00
SKU
916523
Mafell KSS 400 Cross-Cutting System is available to buy in increments of 1

Stop carrying those heavy tools to your worksite!  The KSS 400 can take the place of a chop saw using its cross cutting system.  It can emulate a table saw, and make long cuts using the Mafell Guide Rail System.  It also can function as a regular circular saw since the quick-release catch easily detaches the saw from the guide track.  Three saws in one!  This enables a carpenter to make accurate and clean cuts at the work location without having to walk back and forth to stationary saws, saving energy and time.

The KSS 400 will forever change the way you think about cutting your timbers!  This powerful and innovative circular saw is connected to a unique aluminum guide track composed of a friction pad on the bottom side of the guide and an adjustable "smart" stop for either perfectly square cuts or precise miter cuts up to a 60° angle.  Its handling is unbeatable!  You simply place the guide track up against the leading edge of the stock and push the saw through the wood, without needing to guide the saw or follow the line by eye.  The hard rubber edge of the aluminum guide prevents splintering of the top surface of the wood, even during multiple angle cuts.

Thanks to magnesium die-cast components, the entire KSS 400 system weighs only 11.8 lbs.  The FLIPPKEIL riving knife withdraws into the body of the saw during plunge cuts and then returns to its safety position as you advance forward with your cut.  Once the cut has been executed, the saw automatically returns to the starting position on the aluminum track via an integrated polyethylene cable.  Since this saw can cut up to 1-1/2" deep at a 45° angle, the KSS 400 can also dramatically speed up framing carpenters' productivity and accuracy while cutting "2-by" studs, joist and rafters.


Specifications

Cutting depth at 0° on track: 0 to 1-15/16"
Cutting depth at 45° on track: 0 to 1-7/16"
Cutting depth at 0° off track: 0 to 2-1/8"
Cutting depth at 45° off track: 0 to 1-11/16"
Tilt range: 0 to 45°
Saw blade diameter: 6-1/4"
Nominal speed - no load: 5,200 rpm
Motor: 120 V / 60 Hz
Current: 10 A
Weight with track: 11.8 lbs

Standard Equipment

  • Guide Track 400  (15-3/4")
  • 32T Cross-Cutting Carbide Blade
  • Guide Bow
  • Hose Connector
  • Allen Key
  • 13.1 ft Cord

Accessories

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account