Mafell ZSX TWIN Ec Chain Beam Saw

  • Rips and cross-cuts timbers up to 15-11/16" deep
  • Powerful 380 V motor
  • Tilts up to 60°
  • Compatible with Mafell Guide Rail System

Download ZSX TWIN Ec Brochure

This item ships in 2 to 4 weeks.  Please call to order!

$15,870.00
SKU
961601
Mafell ZSX TWIN Ec Chain Beam Saw is available to buy in increments of 1

Ripping a big timber with a chain beam saw can be challenging!  Not only is it slower, but it often draws too many amps, potentially risking motor failure.  If only there was a chain saw with two motors to divide those amps and a special Carbide Ripping Chain...

Enter Mafell's ZSX TWIN Ec Chain Beam Saw!  This son-of-a-gun cutting machine has no problem ripping big timbers and glulams up to 15-11/16" deep.  For long accurate rips, this saw easily slides along Mafell's Accessory Guide Rail System thanks to the supplied Pertinax glider that compensates for the rail height.

The ZSX TWIN Ec also cross-cuts compound angles beautifully using the included Carbide Fine-Sawing Chain and accessory Universal Guide (same as the Mafell ZSX Ec/400 HM Model).  Because of all the deep cuts this saw encounters, Mafell added a unique dust extraction system to remove the large number of chips produced.  The TWIN even includes a special Trolley to store the tool when not in use.

At the core of the Mafell ZSX TWIN Ec are the two 3000-Watt single-phase motors.  They run at the same time on two 230 V phases of the 3-phase electric power system.  Through the miracle of Mafell, it just works!

Every ZSX TWIN Ec chain beam saw is special-ordered and freight shipped from Mafell AG, so please call us at 1-800-869-4169 for a custom quote that meets your project's timelines.  We recommend that you talk to your electrician about 3-phase 380 V power in your shop as well.


Specifications

Cutting depth at 0° off track: 15-11/16"
Cutting depth at 45° off track: 11-1/16"
Cutting depth at 60° off track: 7-13/16"
Cutting depth at 0° on track: 15-1/2"
Tilt range: -15 to 60°
Nominal speed - no load: 21000 rpm
Motor: 3-phase 380 V
Power input: 2x 3000 W
Weight: 44 lbs

Standard Equipment

  • Carbide Ripping Chain
  • Carbide Fine-Sawing Chain (HM)
  • Chain Bar and Sprocket
  • Trolley
  • Parallel Guide Fence
  • Glider for Guide Rail
  • Combination Screw Driver
  • Open-End Spanner
  • 32.8 ft cord

Accessories

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account