We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Mafell ZSX TWIN Ec Chain Beam Saw
- Rips and cross-cuts timbers up to 15-11/16" thick
- Two powerful 230 V motors
- Tilts up to 60°
- Compatible with Mafell Guide Rail System
Download ZSX TWIN Ec Brochure
Download ZSX TWIN Ec Instruction Manual
This item ships in 6 to 12 months. Please call to order!
Ripping a big timber with a chain beam saw can be challenging! Not only is it slower, but it often draws too many amps, potentially risking motor failure. If only there was a chain saw with two motors to divide those amps and a special Carbide Ripping Chain...
Enter Mafell's ZSX TWIN Ec Chain Beam Saw! This son-of-a-gun cutting machine has no problem ripping big timbers and glulams up to 15-11/16" deep. For long accurate rips, this saw easily slides along Mafell's Accessory Guide Rail System thanks to the supplied Pertinax glider that compensates for the rail height.
The ZSX TWIN Ec also cross-cuts compound angles beautifully using the included Carbide Fine-Sawing Chain and accessory Universal Guide (same as the Mafell ZSX Ec/400 HM Model). Because of all the deep cuts this saw encounters, Mafell added a unique dust extraction system to remove the large number of chips produced. The TWIN even includes a special Trolley to store the tool when not in use.
At the core of the Mafell ZSX TWIN Ec are the two 230 V motors that run at the same time. Through the miracle of Mafell, it just works!
Every ZSX TWIN Ec chain beam saw is special-ordered and freight shipped from Mafell AG, so please call us at 1-800-869-4169 for a custom quote that meets your project's timelines.
Specifications
Cutting depth at 0° off track: | 15-11/16" |
Cutting depth at 45° off track: | 11-1/16" |
Cutting depth at 60° off track: | 7-13/16" |
Cutting depth at 0° on track: | 15-1/2" |
Tilt range: | -15 to 60° |
Nominal speed - no load: | 21,000 rpm |
Motor: | 2x 230 V |
Current: | 15.9 A |
Weight: | 44 lbs |
Standard Equipment
- Carbide Ripping Chain
- Carbide Fine-Sawing Chain (HM)
- Chain Bar and Sprocket
- Trolley
- Parallel Guide Fence
- Glider for Guide Rail
- Combination Screw Driver
- Open-End Spanner
- Two Anti-Splintering Plates
- 32.8 ft cord
Accessories
- Various guide rails, angle fence, extra chains, and other accessories are available below
- For 8-foot square or diagonal cuts, add one Angle Fence + F 160 + F 80 + two Connecting Pieces + Clamps
- For 10-foot square or diagonal cuts, add one Angle Fence + two F 160 + two Connecting Pieces + Clamps
- For each additional 5 feet, add one F 160 + Connecting Piece
SAME DAY SHIPPING
On Ground & Express orders placed before 3pm Eastern
QUALITY PACKAGING
Tools reinforced or double-boxed to arrive in perfect condition
LIVE PRODUCT ADVICE
Product experts available via phone/email 9am – 6pm Eastern
- Mafell S 35M Dust ExtractorAs low as $1,320.00
- Mafell Z5Ec 12" Portable Band SawAs low as $7,810.00
- Mafell ZSX Ec/400 Chain Beam SawAs low as $8,130.00
- Mafell LS 103Ec Deep Slot MortiserAs low as $13,345.00
- Mafell BST Drilling Station
As low as $930.00